Aqualisa Power Shower Problems

Aqualisa power showers are known for their reliability and efficiency in providing an invigorating shower experience. However, like any appliance, they can encounter problems over time. In this article, we will discuss common issues faced by Aqualisa power shower users and possible solutions to help you get your shower back in working order.

The Issue: Power Shower Won’t Start

Identifying the Problem

If you’ve encountered a situation where your Aqualisa power shower won’t switch on at all or briefly powers on before turning off, you’re not alone. Here are some steps to diagnose the issue:

1. Check Water Pressure: Low water pressure can sometimes prevent the power shower from starting. Ensure that the water pressure in your home is sufficient for the shower to operate correctly. Cleaning the filter can also help improve water flow.
2. Inspect the Solenoid: The solenoid is a crucial component of the power shower. It’s responsible for controlling the flow of water. If the solenoid engages but then releases, it could indicate a problem. However, before replacing it, consider checking other factors.
3. Microswitch Circuitry: The issue might be related to the microswitch circuitry. It’s responsible for signaling the shower to start. If it’s faulty, the shower may struggle to initiate.

Addressing the Problem

Water Pressure and Filter

Start by checking the water pressure in your home. Ensure that it meets the manufacturer’s requirements for the power shower to function correctly. If the pressure is low, consider adjusting your main stop tap to allow more water flow. Additionally, clean the filter to remove any obstructions that might be affecting water flow.

Solenoid and Microswitch Circuitry

If the water pressure and filter are not the culprits, it’s time to consider the solenoid and microswitch circuitry. While the solenoid may seem like the issue due to its engagement and release, it’s essential to explore the possibility of microswitch circuitry problems. These circuits play a vital role in signaling the shower to start.

Manufacturer Support

If you’re unable to diagnose the problem with the solenoid or microswitch circuitry, consider reaching out to Aqualisa’s customer support. They may be able to provide you with more in-depth troubleshooting steps or recommend a solution.

The Challenge of Finding Parts

Parts Availability

Finding spare parts for Aqualisa showers can sometimes be a challenge. The availability of spare parts may be limited to essential components like the engine or the cover. Unfortunately, specific parts in between may not be readily available for replacement.

If the manufacturer recommends replacing the engine and you have exhausted all other troubleshooting options, this may be the most viable solution to get your Aqualisa power shower back in working order. Ensure that you provide the manufacturer with all available details about your shower to facilitate the process.

Conclusion

Dealing with Aqualisa power shower problems can be frustrating, but with patience and thorough troubleshooting, many issues can be resolved. Start by checking water pressure and cleaning the filter. Explore the possibility of solenoid and microswitch circuitry problems. If you cannot find a solution, don’t hesitate to seek assistance from the manufacturer’s customer support, and be prepared to consider replacing essential components like the engine to restore your power shower’s functionality.