Immersun Problems

In this article, we’ll delve into the challenges faced by some users of Immersun systems, particularly in relation to installation and functionality. While we won’t mention specific forum details or usernames, we aim to provide insights into the issues experienced and potential solutions.

Mysterious Circuit Breaker and RCD Trips

One user reported an unusual problem with their Immersun system. They had a 17th edition electrical board with a main switch, voltage optimizer (VO), immersion circuit breaker, and multiple RCD (Residual Current Device) units. Initially, the Immersun system worked fine, but the homeowner noticed that the system had stopped functioning one morning.

Upon inspection, they found that an RCD unit had tripped, causing a power outage in a portion of their house. When they attempted to reset the RCD unit, it immediately tripped again, taking out the circuit breaker as well. The user attempted to reset the Immersun unit, but it continued to blow the fuse and trip the circuit breaker.

Back Voltage Error on New Immersun Unit

Another user encountered an issue with a brand-new Immersun unit. Upon installation, the unit displayed a “back voltage present” error, a problem that hadn’t been experienced with older units. Despite meticulously checking all connections and ensuring the immersion circuit was correctly installed before the Immersun unit was added, the problem persisted.

After contacting Immersun technical support, the user was guided through the unit’s setup process. However, the unit repeatedly blew the fuse during the setup. The technical support representative explained that the new units were designed to be less tolerant of back voltage, unlike the older models.

Potential Surge After Power Cut

In the case of one user, the Immersun system seemed to experience issues after a power cut. While the exact cause wasn’t definitively identified, it was speculated that a surge may have occurred during the power cut, affecting the Immersun unit and causing it to malfunction.

Seeking Solutions

For those experiencing similar issues with Immersun systems, several steps can be taken to address the problems:

1. Contact Immersun Technical Support:

• Reach out to Immersun’s technical support for guidance and assistance. They may provide solutions or identify whether the unit is faulty.

2. Check for Surge Protection:

• If your Immersun system has experienced issues after a power cut, consider adding surge protection to prevent future damage from electrical surges.

3. Keep a Spare Unit:

• If you’re frequently installing Immersun units, having a spare on hand can be a cost-effective way to quickly resolve issues when they arise.

4. Regular Maintenance:

• Ensure that your Immersun system, including all connections, is well-maintained to minimize the risk of problems.

In conclusion, Immersun systems have provided energy-saving benefits for many homeowners, but as with any technology, occasional issues can occur. By following the steps outlined here and seeking professional assistance when needed, you can address Immersun problems and continue enjoying the benefits of efficient energy management.