Lexmoto lxr 125 Problems

The Lexmoto LXR 125, like any machine, has its fair share of loyalists and detractors. However, recent observations and discussions amongst owners have highlighted some recurrent issues. This article explores these problems and provides insights on possible solutions.

Starting and Running Issues

One of the major complaints from Lexmoto LXR 125 owners is the difficulty they face when trying to start their bikes, as well as keeping them running. To further narrow down this issue, one user listed the steps they took in attempting to resolve this problem:

• Old Battery: Despite trying an older battery, the bike ran smoothly until reaching its destination, then it failed to restart.
• New Battery: The recently installed battery, which was only three months old, seemed to have drained due to the number of start attempts.
• Maintenance: The owner took preventative maintenance measures, changing the oil, oil filter, air filter, and spark plug. Yet, these actions didn’t yield a positive result.
• Electrical Check: No apparent loose cables or unplugged connectors were observed, and the OBDII did not produce any error codes.

From this experience, a few recommendations were made:

Check the Electrical Connection

It is essential to ascertain if there is a weak battery or poor connection. Possessing tools like a voltmeter or DMM can be very beneficial in this regard. If there’s an electrical issue, the starting point should be the battery, followed by the terminals and grounding. Next, inspect the fuses, ignition wiring, and any bad connections.

Coil and Connection Placement

The coil placement on the Lexmoto LXR 125 is located precisely where the front wheel can splash up road water. Over time, this can lead to the decay of the connections. Checking the condition of the coil and its connections, especially if the bike has been in use for several years, can be vital.

Fuel and Spark Check

Before diving deep into the more intricate details, perform simple tests.

• Spark Check: Ensure the spark plug is working efficiently. The Lexmoto LXR 125 has been reported to have issues where road water affects the connections due to the coil’s placement.
• Fuel Check: Confirm that fuel is being efficiently pumped from the tank. Detach the pipe from the tank, direct it into a container, and observe if it pumps while turning. If it doesn’t, it’s imperative to verify the power reaching the pump.

Stator Issues

A prevalent observation made was the potential problem with the stator. When the bike was jump-started, it stopped once the terminals were removed. Furthermore, when the bike’s voltage was checked while it was running at 3k rpm, it indicated a reading of around 11.56. Such a reading points towards a possible stator issue. One suggested solution was to replace the stator.

Conclusion

The Lexmoto LXR 125 is a basic machine and is not immune to challenges. Nevertheless, by methodically diagnosing potential issues and understanding the bike’s quirks, many of the problems can be mitigated or resolved. Always consider consulting a mechanic, especially if the problem persists or if you’re unsure about attempting fixes on your own.