Myson Kickspace 500 Problems

Myson Kickspace 500 is a popular heater choice, especially for kitchens. However, like all appliances, it sometimes runs into issues. Below, we delve into common problems faced by users and their potential solutions.

Problem: The Myson Kickspace heater, after a period of use, begins to operate intermittently – turning on for only short bursts of about 30 seconds, then shutting off for a few minutes, and then repeating the cycle. Originally, when the heating system was on, the unit used to run continuously.

Possible Causes & Solutions:

1. Thermostat Issues: One of the primary suggestions is that the thermostat within the heater may be causing the fan to turn on and off. This problem could potentially be diagnosed by:
   • Solution: Removing the unit and testing it electrically.
2. Flow Temperature: There’s a discussion regarding the optimal flow temperature. Some users run their units at 60C/65C, while others suggest that higher temperatures of around 80C are recommended by the manufacturer.
   • Solution: Ensure that the flow temperature aligns with the heater’s recommendation. If unsure about the temperature, this usually refers to the boiler output temperature.
3. Blockages: There’s a possibility that the heater or the connecting pipes are partially blocked.
   • Solution: Inspect the heat exchanger and the flexible pipes that link the heater to the main heating system for any blockages. Regular maintenance and cleaning can prevent this issue.
4. Collapsing of Inner Lining: In some cases, the rubber lining inside the flexible connecting pipes might collapse, thereby restricting the flow.
   • Solution: Replacing these flexible hoses can rectify the issue. When replacing, ensure to opt for recommended hoses to ensure compatibility and durability.
5. Incorrect Sizing: There are concerns about the heater being undersized for the given space, resulting in ineffective heating.
   • Solution: When choosing a heater, make sure it’s appropriately sized for the room. If your current unit is undersized, you might need to consider an upgrade or additional heating solutions.
6. Electromechanical Thermostat Issue: The fan in the Kickspace is switched on by an electromechanical thermostat. If it becomes loose or malfunctions, it could cause the heater to cycle inconsistently.
   • Solution: Checking and ensuring the thermostat is securely in place and functions properly can address this. If the thermostat is faulty, consider replacing it.
7. Sludge Build-up: Over time, sludge can build up in the system, particularly if the heater is situated at a system’s lowest point.
   • Solution: Periodic flushing of the system and using chemicals to dissolve and remove sludge can prove effective. A sludge filter on the boiler return can also prevent this issue post-flushing.
8. External Factors: It’s worth noting that the efficiency of the heater can also be affected by external factors such as room insulation, room size, and overall home architecture.

In conclusion, while the Myson Kickspace 500 is a widely used and trusted product, like any appliance, it can face operational issues over time. Regular maintenance, periodic checks, and consulting with professionals can ensure longevity and efficient functioning. If in doubt, always refer to the product manual or consult a heating specialist.