Rangemaster Induction Hob Problems

If you’re a Rangemaster induction hob owner and have recently encountered power loss during your cooking endeavors, you’re not alone. Many users have faced similar issues, seeking answers and solutions to get their hobs back in working order. In this article, we’ll dive into the reported problems and explore potential solutions to help you regain control of your kitchen.

Power Loss Mystery

One of the most perplexing issues with Rangemaster induction hobs is the sudden loss of power in the midst of cooking. Users have reported that the trip switch remains unaffected, leaving them in the dark about the cause of the problem. Symptoms include a complete absence of power, with the clock and other functions failing to operate.

Potential Causes and Solutions

Let’s unravel the mystery and examine the possible causes and solutions for these power loss problems:

RCD and Circuit Tripping

Some users have questioned whether an RCD (Residual Current Device) may have tripped, affecting other circuits in the process. However, as reported, nothing else seems to be impacted. This raises doubts about a broader electrical issue.

Isolation Switch Examination

If you have an isolation switch for your cooker, it’s crucial to check its status. There are two key considerations:

• Ensure that the switch hasn’t been inadvertently turned off.
• Inspect the switch for any signs of overheating or a burning smell. These could indicate a loose connection that has now failed.

Loose Connections

Loose connections can be a common culprit behind power loss. These connections can occur within the cooker outlet point, often located at the back of the appliance. Before attempting any checks, always ensure that the breaker or trip switch is turned off for safety.

Burnt Live Feed

In some cases, users have discovered a burnt live feed when they opened up the back of the cooker. This raises questions about whether the fault lies with the cooker itself or the electrical system. It’s important to determine the extent of the damage and the exact location of the issue.

Thermal Overload

Check if there’s a thermal overload device, which is generally visible when you remove the back cover of the cooker. Sometimes, the overload burns out, affecting cables and spade connectors.

Live Connection Damage

When users reported that the mains power cable connected to the spade terminals on the cooker was burnt out, further investigation is necessary. Determine what these spade terminals connect to inside the cooker.

Warranty and Professional Help

If the damage appears to be within the cooker itself, it’s likely a fault with the appliance. Users have noted that a two-year warranty may cover such issues, provided that the installation and load are correct. Consider reaching out to Rangemaster directly for warranty details and potential repair or replacement options.

In conclusion, Rangemaster induction hob problems can be frustrating, but they are not insurmountable. By carefully examining the potential causes and following the suggested solutions, you can troubleshoot and address the issue. Whether it’s a loose connection, burnt live feed, or a warranty-covered fault, taking the right steps will help you get your induction hob back in working order and restore the joy of cooking in your kitchen.