Triton Enrich Shower Problems

Electric showers, such as the Triton Enrich model, are designed for their convenience and energy efficiency, heating water on demand. However, some users of the Triton Enrich have encountered specific issues which can impact the shower’s performance. Here’s an exploration of the main problem faced by users and potential solutions.

The Problem

One of the primary challenges faced by users of the Triton Enrich shower is related to temperature regulation:

• The shower may provide cold water when set to a moderate temperature setting.
• The heater doesn’t seem to engage until turned to a very high setting.
• Once the dial reaches the highest settings and makes a clicking sound, the water becomes too hot.
• Adjusting the temperature back down afterwards, the water seems to regulate to a more comfortable warmth.

Possible Causes and Solutions

1. Flow Rate Adjustment: The Triton Enrich shower temperature dial works by regulating water flow. Turning it clockwise reduces the flow, making the water hotter, while anti-clockwise increases flow, making it cooler. It’s essential to note that there can be a delay before the adjusted temperature stabilizes. Before concluding there’s an issue, give it several seconds after making adjustments to see if the temperature stabilizes.
2. Flow Rate Measurement: Before seeking technical solutions, users should check the shower’s flow rate. If the flow rate is found to be approximately 5 litres per minute, it might be too low for the shower to function correctly.
3. Boiler and Plumbing Issues: Changes in household plumbing can impact the water flow. For instance, changing from a conventional boiler to a Worcester Bosch condensing boiler, while retaining old cold and hot water tanks, might impact the water flow rate to the shower. It’s essential to check any recent plumbing modifications and consult with a plumbing expert on their potential impact.
4. Dial Orientation: A potential cause could be that the top selector dial is not correctly oriented. Sometimes, the dial could be 180 degrees out of sync. So, when you think it’s set to “STOP”, it’s actually on “ECO”. It’s crucial to ensure the dial is set correctly.
5. Installation Expertise: The importance of having a shower fitted by a professional cannot be overemphasized. If the new shower was installed by someone other than a plumber, particularly if it was a direct replacement of an older model, there might be installation errors.
6. Reach Out to Manufacturer: If doubts persist about the shower unit’s functionality, it’s advisable to contact Triton or refer to the manufacturer’s instructions to understand the shower’s requirements better. This step can help determine if the unit might be faulty.
7. Professional Assessment: If there are ongoing issues or confusion about the installation or how the shower operates, it’s best to call in a professional plumber or technician. They can assess the current setup, identify any problems, and suggest potential solutions.

Conclusion

While the Triton Enrich shower is generally reliable and efficient, like all appliances, it can have its quirks. Recognizing potential issues and understanding how to address them can lead to a smoother, more comfortable showering experience. If in doubt, always consult with a professional to ensure your shower functions at its best.