Caravan Motor Mover Problems
A motor mover for caravans can be a lifesaver, allowing for easy maneuvering and positioning of your caravan. However, as with any tech equipment, sometimes things can go awry. One of the commonly discussed issues revolves around the Emove EM 203 motor mover. Here’s a detailed overview of the problem and potential solutions.
The Problem:
Owners of the Emove EM 203 movers have reported instances where the motor mover suddenly stops functioning. The base unit displays a flashing green light which eventually turns off, while the handset maintains a constant green light. Even though the battery shows a full charge and all connections seem intact, attempts at rebooting and reprogramming the handset to the control unit prove futile.
Possible Solutions and Checks:
- Fuses and Control Unit: Before diving deep into the problem, it’s a good idea to check for fuses in the control unit. An in-line fuse exists in the main power lead from the battery. If this is in working condition, it indicates the presence of power in the unit. However, if your control unit is sealed and still under warranty, refrain from tampering with it.
- Synchronization Issues: In some cases, the electronic control unit and the remote might lose synchronisation. To address this:
- Press the reset button on the base unit.
- Simultaneously press the forward and reverse buttons for about three seconds.
- Await the beep which indicates restored synchronisation.
- Battery Voltage Drop: Even if the battery appears fully charged, its voltage might significantly drop when the mover is activated, especially given the mover’s average 20 amps draw. It’s advisable to check the battery’s voltage when the mover is powered on. If the battery is old, consider replacing it. Some users found success with a new Tayna battery after facing similar issues with different movers.
- Communication Interruption: The manual for the Emove EM 203 movers provides a solution for a blinking green LED. This often indicates a communication disruption between the handset and control unit. Potential reasons include:
- Excessive distance between the remote control handset and control unit.
- The battery isolation switch for the manoeuvring system being off.
- Distortion signals disturbing communication. The LED will remain steady green once the connection is restored, signalling that the system is ready for use.
- Reach Out to Support: If all troubleshooting methods fail, it’s recommended to get in touch with the customer support or helpline of the product. They might provide specific insights or solutions tailored to the issue.
Conclusion:
While technical issues can be frustrating, especially when on a campsite, it’s always beneficial to understand common problems and their solutions. Even if a unit fails, warranties can be handy. Nonetheless, the importance of having manual backup plans, like seeking help or using traditional maneuvering methods, cannot be understated. Safe travels!
