Hoover One Touch Washing Machine Problems
In this article, we’ll discuss a perplexing issue faced by a Hoover washer/dryer user, focusing on problems related to the machine’s motor and spin functions. The user reported specific issues with the machine’s drum movement during wash cycles and raised questions about potential causes and solutions.
The Problem: Inconsistent Drum Movement
The user described a problem with their trusty old Hoover washer/dryer WD1200 (A8722), which had been in service for an impressive 22 years. Specifically, during wash cycles, the machine exhibited erratic behavior with the drum’s back-and-forth movement. Sometimes, the drum moved as expected, but on other occasions, it failed to do so. Additionally, there were instances where it appeared that the drum’s movement was initiated but stopped almost immediately. Notably, the machine performed fast spins without any issues and displayed no problems during the drying cycle.
The user suspected a problem related to the creation of an electromagnetic field to start the motor but ruled out the possibility of a faulty capacitor since the machine did not utilize one.
Forum Discussion and Troubleshooting
Forum members engaged in discussions and troubleshooting to identify the root cause of the issue. Some suggested that the problem might lie with switches inside the timer, which controlled the reversal of the motor’s polarity to enable it to run in both directions. However, others raised concerns about the program timer switch and the potential for it to be faulty, particularly since the problem appeared inconsistent between wash and spin cycles.
Additionally, there were discussions regarding the cleanliness and condition of the brushes, which could affect the motor’s performance. The user had previously replaced the brushes eight years ago, and they were still in good shape during the latest inspection.
A hypothesis emerged that the rough sound produced during drum movement might be attributed to one of the brush housings. Despite extensive inspection and cleaning, the source of the rough sound remained elusive.
Progress and Potential Solutions
Following the forum discussions, the user took action to address the issue. They removed the motor, disassembled it, cleaned it thoroughly, and inspected the brushes. The brushes were found to be in decent condition, with even wear and no significant signs of damage or wear.
However, a peculiar observation was made regarding the motor’s smoothness in different directions. One brush housing exhibited a smoother rotation in one direction and a rougher one in the other direction, while the other brush housing displayed smooth rotation in both directions.
The user acknowledged that the machine’s operation had improved somewhat after reassembly, although the rough sound persisted, particularly after a full fast spin cycle. While the problem had not been definitively resolved, it seemed that the motor’s performance was gradually improving.
Conclusion
The Hoover One Touch washing machine problem discussed in this article is characterized by inconsistent drum movement during wash cycles, primarily affecting the reversal of the motor’s polarity. Forum members engaged in troubleshooting and offered potential explanations, including issues with the timer switch, brush condition, and motor cleanliness.
Despite the user’s efforts to address the problem, it remained partially unresolved. However, progress was made in improving the machine’s operation after thorough cleaning and inspection. Further exploration and potential solutions may be required to fully rectify the issue and restore the washer/dryer to optimal performance.
