Triton T80 Easi Fit Shower Problems

If you’re experiencing issues with your Triton T80 Easi-Fit shower, you’re not alone. Many users have faced similar problems and sought advice on forums. In this guide, we’ll explore the common problem and potential solutions based on user experiences and advice from the community.

Understanding the Issue

Users have reported a recurring problem with their Triton T80 Easi-Fit showers. The issue can be summarized as follows:

1. Shower Cutting Out: The shower is still operational, but it frequently cuts out, causing the water to go cold. This typically happens when other water fixtures in the house, such as sink taps, are turned on.

Seeking Solutions

Before jumping to conclusions or replacing your shower, it’s worthwhile to explore potential solutions based on the insights shared by users. Here are some of the troubleshooting steps and suggestions provided by the community:

1. Upgrading to a More Powerful Shower: Some users have attempted to resolve the issue by upgrading to a higher-power shower model, such as switching from an 8.5kW to a 10.5kW Triton T80 shower. This might alleviate the problem if your wiring and plumbing can support the higher power requirement.

2. Checking Water Pressure: Water pressure can be a critical factor in shower performance. The new 10.5kW Triton T80 shower requires a minimum water pressure of 1.5 bar, compared to 1.0 bar for the 8.5kW model. Users have suggested verifying the water pressure to ensure it meets the requirements of your new shower.

3. Measuring Water Pressure: To check your water pressure accurately, you can invest in a 4-bar pressure gauge and fittings. Connect the gauge to the shower supply pipe and observe how much the pressure drops when other taps are turned on. This can help diagnose whether low water pressure is causing the issue.

4. Adjusting Isolator Valve: If the shower is affected by the flow from the bathroom sink tap, users have successfully resolved the problem by adjusting the isolator valve on the cold water supply to the sink. By slightly restricting the flow, you can prevent the shower from going cold when the tap is on.

5. Ensuring Proper Wiring: Make sure that your shower is wired correctly and that it’s on a dedicated circuit with the appropriate amperage. Installing the right MCB (Miniature Circuit Breaker) and ensuring that it can handle the shower’s power requirements is crucial.

6. Consider Pumped Showers: In some cases, especially if you have access to your attic, a pumped shower might be a solution. This type of shower uses a pump to ensure consistent water pressure, which can help prevent fluctuations when other taps are in use.

7. Professional Assistance: If you’re uncertain about making these adjustments or if the issue persists, it’s advisable to consult a qualified electrician or plumber who can assess your shower’s setup and recommend appropriate solutions.

Conclusion

Experiencing problems with your Triton T80 Easi-Fit shower can be frustrating, but there are potential solutions to explore before considering a replacement. By following the advice and insights shared by the community, you can troubleshoot the issue and, in many cases, enjoy a more reliable shower experience. Remember to prioritize safety and consult professionals if needed to ensure your shower operates correctly and efficiently.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *